Air cooled cables (DJ) provide an economical alternative for lighter duty applications not
requiring water cooled cables.
The length is measured from the bolt hole
centers on straight or 45° terminals. On
terminals with 90° bends, measure to the
extreme outside edge. On terminals with two holes, measure to the center of the outer holes.
Standard terminal width is 1-1/4”. 1-3/8” and 1-1/2” are available; specify when ordering.
Cables are also available as DJ-IC Isolated
Conductor (each individual rope is in rubber tubing), DJ-SC Stabilized Collar (reduces strand
failure at the cable terminal) and DJ-XF (36 AWG Copper Rope).
DJ-IC eliminates frictional wear by use of
rubber tubing for each rope.
DJ-SC uses a Stabilizer Flare on the terminal to reduce stress on the cable ends. This
significantly reduces strand failure at the
DJ-XF uses 36 AWG strand rope and an extremely flexible protective cover. The DJ-XF is twice as flexible as the standard DJ air cooled cable.
Air cooled cables are available from 350 MCM to 2000 MCM cross sections.